路桥专业论文:桥梁设计论文
毕业论文3.14W
摘要:设计是根据设计任务书的要求和《公路桥规》的规定对胜利河桥进行方案比选和设计的。对该桥的设计,本着“安全、实用、经济、美观”的八字原则,本设计提出三种不同的桥型方案进行比较和选择。方案一为预应力混凝土连续梁桥,方案二为梁拱组合体系桥,方案三为悬索桥。经由以上原则以及设计施工等诸多方面考虑后,确定预应力混凝土连续梁桥为最终设计方案。
本预应力混凝土连续梁桥共分为三跨(30m 50m 30m)主跨50m,边跨对称30m;主梁采用单箱单室预应力混凝土箱梁,跨中梁高为1.5m,支座处梁高为2.8m,截面高度按二次抛物线形式变化;桥面净宽为7 2×1.5m;设计荷载为公路-Ⅰ级。
在设计中,运用了桥梁设计软件Midas建立桥梁模型,并对桥梁恒载、活载及徐变内力进行分析计算,得出预应力钢束的预估值。最后对主梁的应力、变形等进行验算。经分析比较及验算表明该设计计算方法正确,内力分布合理,符合设计任务的要求
关键词 桥梁设计; 预应力混凝土; 箱梁; 变截面连续梁 ;Midas桥梁模型
Abstract: The design is based on the requirements of the design task and "Highway Bridge Regulation". The design of the bridge is carried out in the eight-character principle of "safety, pratically, economically and aeshetic" by comparing and choosing the best one. The first program is continous prestressed concrete grider bridge, the second one the beam combination of arch bridge,and the third one is the suspension oding to the above principles and construction factors, the prestressed conous bridge is chosen to the ultimate.
The continous prestressed concrete girder bridge is divided into three inters, (30m 50m 30m), with the main span of 50m, and 30m-symmetry one. Prestressed concrete box grider is used as the main beam; the beam depth in the mid-span is 1.5m, while at the support bearing it is sectional depth is changed in the form of net width of the deck is 7 2x1.5m,and the design load is for the highway-I.
In the design, the bridge design software MIDAS is used to get the calculation model. By analyzing and computing the dead load, live load and internal force, the estimated value of the prestressed strand is got. Finally, checking calculation is carried out to the stress and deformation of the main beam. The results of the analysis and checking calculation show that the design calculation method is correct , and the internal force distribution is reasonable to the design task.
Key words: bridge design; prestressed concrete; box-girder; non-uniform continuous beam; MIDAS bridge model
目 录 设计原始资料…………………………………………………………………………….1
第一章 方案比选 ………………………………………………………………………2
第二章 上部结构形式及尺寸拟定 …………………………………………………5
一.主跨径的拟定 …………………………………………………………………… 5
二.顺桥向梁的尺寸拟定 …………………………………………………………… 5
三.横桥向的尺寸拟定 ……………………………………………………………… 5
四.桥面铺装 ………………………………………………………………………… 6
五.本桥主要材料 …………………………………………………………………… 6
第三章 桥面板的计算 …………………………………………………………………8
本预应力混凝土连续梁桥共分为三跨(30m 50m 30m)主跨50m,边跨对称30m;主梁采用单箱单室预应力混凝土箱梁,跨中梁高为1.5m,支座处梁高为2.8m,截面高度按二次抛物线形式变化;桥面净宽为7 2×1.5m;设计荷载为公路-Ⅰ级。
在设计中,运用了桥梁设计软件Midas建立桥梁模型,并对桥梁恒载、活载及徐变内力进行分析计算,得出预应力钢束的预估值。最后对主梁的应力、变形等进行验算。经分析比较及验算表明该设计计算方法正确,内力分布合理,符合设计任务的要求
关键词 桥梁设计; 预应力混凝土; 箱梁; 变截面连续梁 ;Midas桥梁模型
Abstract: The design is based on the requirements of the design task and "Highway Bridge Regulation". The design of the bridge is carried out in the eight-character principle of "safety, pratically, economically and aeshetic" by comparing and choosing the best one. The first program is continous prestressed concrete grider bridge, the second one the beam combination of arch bridge,and the third one is the suspension oding to the above principles and construction factors, the prestressed conous bridge is chosen to the ultimate.
The continous prestressed concrete girder bridge is divided into three inters, (30m 50m 30m), with the main span of 50m, and 30m-symmetry one. Prestressed concrete box grider is used as the main beam; the beam depth in the mid-span is 1.5m, while at the support bearing it is sectional depth is changed in the form of net width of the deck is 7 2x1.5m,and the design load is for the highway-I.
In the design, the bridge design software MIDAS is used to get the calculation model. By analyzing and computing the dead load, live load and internal force, the estimated value of the prestressed strand is got. Finally, checking calculation is carried out to the stress and deformation of the main beam. The results of the analysis and checking calculation show that the design calculation method is correct , and the internal force distribution is reasonable to the design task.
Key words: bridge design; prestressed concrete; box-girder; non-uniform continuous beam; MIDAS bridge model
第一章 方案比选 ………………………………………………………………………2
第二章 上部结构形式及尺寸拟定 …………………………………………………5
一.主跨径的拟定 …………………………………………………………………… 5
二.顺桥向梁的尺寸拟定 …………………………………………………………… 5
三.横桥向的尺寸拟定 ……………………………………………………………… 5
四.桥面铺装 ………………………………………………………………………… 6
五.本桥主要材料 …………………………………………………………………… 6
第三章 桥面板的计算 …………………………………………………………………8
-
倾听音乐、聆听音乐、静听音乐
音乐欣赏,是人的听觉器官接触音乐作品的音响运动形式而产生的一种能动的审美活动,也是一种通过音乐形象去体验和认识社会生活的积极的思维活动。通过音乐欣赏教学,可以接触古今中外的各种题材、体裁、风格的作品,从而开阔音乐视野,懂得一些基本的音乐知识,培养高尚的...
-
“多读”是语文教学的精髓
在文章中,不论是事情的记叙,人物和情境的描写,还是事物的介绍说明,观点的阐述和议论,都直接或间接,直露或含蓄地表达着作者的思想感情倾向,对学生起思想导航和激励作用,产生美感和丰富的想象,使学生不断地受到真善美的熏陶和感染。这在多数情况下都是通过朗读来实现的,忽...
-
供电企业班组员工绩效管理探讨
近年来,供电企业在不断创新与发展中,取得了不错的效益,随之而来的就是员工的绩效考核问题越发严重。为此,我们根据供电企业的特点,从整体方面对绩效考核探索出一个完善的考核模式。在现代信息社会,电成为了人们生活中必不可少的一部分,而供电企业也因为行业的增大而对...
-
浅议体育课多班同课窘境的应对策略论文
随着学校规模的不断扩大,在同一课次、同一场地上体育课的班级数也越来越多,而由于受场地、器材等因素的影响,造成了体育课多班同课教学的窘境。一、体育课多班同课教学窘境的原因1、体育设施配备滞后,同场教学有序开展受到制约。场地、器材配备与同课教学需求的差...